Project Description

The Rider Jet with Top 80 engine is the lightest model in the series. It has the centrifugal clutch, and with a 125 cm propeller it has a thrust of 52 kg. Its total weight, including harness is 20 Kg.
Optional Equipment

Cage with Double or Single Circle


option1

All Rider series can be equipped with cage double or single circle. We recommend single circle to anyone who wants to minimize weight and wants the maximum aerodynamics, but we don’t recommend to anyone who doesn’t have a good practice to take off. In this case you can take the double circle frame for greater propeller protection.

Propeller Type


option2The entire Rider series can be equipped with wooden propeller or fiberglass propeller. The wooden propeller is not divisible and more delicate. The fiberglass propeller is divisible and much more resistant to the use and storage.

Harness Size


It is possible to choose the size of the harness through the table beside. The table is indicative. Everyone can choose according to your taste and needs also sizes other than those listed.
option3

High or Low Distance Bar


option4All Rider series can be equipped with low or high distance bar. This is a choice based on feeling that it wants to have with the paragliding:

The high distance bar is very stable, very easy to adjust but it is a little more deaf to information that the sail send.

The low distance bar must be tailored more precisely considering the weight, the height and position preferences for each pilot, definitely more technical but more active at every stage of the flight.

 
The Rider Jet with Top 80 engine is the lightest model in the series. It has the centrifugal clutch, and with a 125 cm propeller it has a thrust of 52 kg. Its total weight, including harness is 20 Kg.
Optional Equipment

Cage with Double or Single Circle


option1

All Rider series can be equipped with cage double or single circle. We recommend single circle to anyone who wants to minimize weight and wants the maximum aerodynamics, but we don’t recommend to anyone who doesn’t have a good practice to take off. In this case you can take the double circle frame for greater propeller protection.

Propeller Type


option2The entire Rider series can be equipped with wooden propeller or fiberglass propeller. The wooden propeller is not divisible and more delicate. The fiberglass propeller is divisible and much more resistant to the use and storage.

Harness Size


It is possible to choose the size of the harness through the table beside. The table is indicative. Everyone can choose according to your taste and needs also sizes other than those listed.
option3

High or Low Distance Bar


option4All Rider series can be equipped with low or high distance bar. This is a choice based on feeling that it wants to have with the paragliding:

The high distance bar is very stable, very easy to adjust but it is a little more deaf to information that the sail send.

The low distance bar must be tailored more precisely considering the weight, the height and position preferences for each pilot, definitely more technical but more active at every stage of the flight.

 
The Rider Jet with Top 80 engine is the lightest model in the series. It has the centrifugal clutch, and with a 125 cm propeller it has a thrust of 52 kg. Its total weight, including harness is 20 Kg.
Optional Equipment

Cage with Double or Single Circle


option1

All Rider series can be equipped with cage double or single circle. We recommend single circle to anyone who wants to minimize weight and wants the maximum aerodynamics, but we don’t recommend to anyone who doesn’t have a good practice to take off. In this case you can take the double circle frame for greater propeller protection.

Propeller Type


option2The entire Rider series can be equipped with wooden propeller or fiberglass propeller. The wooden propeller is not divisible and more delicate. The fiberglass propeller is divisible and much more resistant to the use and storage.

Harness Size


It is possible to choose the size of the harness through the table beside. The table is indicative. Everyone can choose according to your taste and needs also sizes other than those listed.
option3

High or Low Distance Bar


option4All Rider series can be equipped with low or high distance bar. This is a choice based on feeling that it wants to have with the paragliding:

The high distance bar is very stable, very easy to adjust but it is a little more deaf to information that the sail send.

The low distance bar must be tailored more precisely considering the weight, the height and position preferences for each pilot, definitely more technical but more active at every stage of the flight.

 
The Rider Jet with Top 80 engine is the lightest model in the series. It has the centrifugal clutch, and with a 125 cm propeller it has a thrust of 52 kg. Its total weight, including harness is 20 Kg.
Optional Equipment

Cage with Double or Single Circle


option1

All Rider series can be equipped with cage double or single circle. We recommend single circle to anyone who wants to minimize weight and wants the maximum aerodynamics, but we don’t recommend to anyone who doesn’t have a good practice to take off. In this case you can take the double circle frame for greater propeller protection.

Propeller Type


option2The entire Rider series can be equipped with wooden propeller or fiberglass propeller. The wooden propeller is not divisible and more delicate. The fiberglass propeller is divisible and much more resistant to the use and storage.

Harness Size


It is possible to choose the size of the harness through the table beside. The table is indicative. Everyone can choose according to your taste and needs also sizes other than those listed.
option3

High or Low Distance Bar


option4All Rider series can be equipped with low or high distance bar. This is a choice based on feeling that it wants to have with the paragliding:

The high distance bar is very stable, very easy to adjust but it is a little more deaf to information that the sail send.

The low distance bar must be tailored more precisely considering the weight, the height and position preferences for each pilot, definitely more technical but more active at every stage of the flight.

 

Paramotor suitable for pilot weight from 130 lbs. to 285 lbs. Equipped with a Vittorazi Moster engine of 25 HP 185 cc.manual starter, Walbro 37 carburetor, Airbox, chromed tune pipe exhaust with an extra muffler (silencer), start/stop switch and adjustable cruise control.

The structure of the engine Moster 185 is simple, streamlined and compact. The complete weight of the engine is 12.9 kgs in pull starter version, the installation “plug&play” is very fast and simple on every cage. The thermic group is cooled with the air generated by the extraction flow of the propeller, in direct tramission with the crankshaft.

The motor develops a power of 25 hp at 7.800 rpm,is particularly suitable for a weights pilot + paramotor or trike between 100 and 160 Kgs (200 to 350 pounds). The engine`s not been studied for the tandem use or for a take off weight over 160 kgs. The thrust is regular, smooth, gentle up to reach 75 kgs (165 pounds) with a 130 cms (51 inches) propeller or 70 kgs (155 pounds) with 122 cms (48 inches) propeller.

The motor starts on the ground or during the flight in unique way considering the capacity 185cc and avoid the installation of the decompressor valve. The vibrations are almost imperceptible on every speed, while the distribution of the weights and the dimentions of the motor, reduce the torque effect given from the propeller.

The motor has been studied for getting a limited noise, attenuated by airbox, from the belt transmission, from a good silencer and from the choice of the best propellers. The consumption of this motor is about 3,5 liters / hour considering a cruise flight.

Thanks to the use of the membrane carburator Walbro, the motor maintains a constant engine idle speed, also changing the inclination in flight or in preparation to the take-off. The Moster 185 cannot be mounted upside down or rotated of 90°. It can also be supplied with extractable and interchangeable pulley, so can be used with different measures of propeller. It is available with components optional in carbon fiber, chromed or anodized.